Huizhou Tianyi rare material Co., Ltd

Product classification
  Sputtering Target
  Rare Earth Material
  Evaporation Material
  Chemical Reagent
  High Pure Metals
  Compounds
About TYR
Indium

Indium, In

 

Pure Indium, In Metal      Indium Alloy        Indium Oxide, In2O3       Indium Nitride, InN      Indium Selenide, InSe     Indium Telluride, InTe     

Indium Antimonide, InSb      Indium Arsenide, InAs    Indium Sulfide, In2S3    Indium Zinc Oxide, ZIO       Indium Tin Oxide, ITO

 

Powder   Sputtering Targets    Vacuum Evaporation Material are available

 

Powder-625mesh, -325mesh-200mesh-160mesth, -100mesh e.t.c particle size

Sputtering Targets : Diameter: 355.6mm (14") max. Single piece Size: Length: <254mm, Width: <127mm, Thickness: >1mm, if larger size than this, we can do it as tiles joint by 45 degree or 90 degree

Evaporation MaterialPieces: 1-4mm, 1-6mm, 3-6mm, 3-12mm e.t.c,  Tablets: 8-9mm dia. X 4-5mm thick, 10mm dia. X 10mm thick e.t.c

 

Applications:  Electronics, Metal and alloys:

Electronics: Indium oxide (In2O3) and indium tin oxide (ITO) are used as a transparent conductive coating applied to glass substrates in the making of electroluminescent panels.[38]

 Some indium compounds such as indium antimonite, indium phosphide,[39] and indium nitride are semiconductors with useful properties.

 Indium is used in the synthesis of the semiconductor copper indium gallium selenide (CIGS), which is used for the manufacture of thin film solar cells.

 Used in light-emitting diodes (LEDs) and laser diodes based on compound semiconductors such as InGaN, InGaP that are fabricated by Metal-organic Vapor Phase Epitaxy (MOVPE) technology. Ultrapure metal-organics of indium include high purity trimethyl-indium (TMI), which is used as a precursor in III-V compound semiconductors, while it is also used as the semiconductor dopant in II-VI compound semiconductors.

Metal and alloys: Very small amounts used in aluminum alloy sacrificial anodes (for salt water applications) to prevent passivation of the aluminum. To bond gold electrical test leads to superconductors, indium is used as a conducting adhesive and applied under a microscope with precision tweezers. In the form of a wire it is used as a vacuum seal and a thermal conductor in cryogenics and ultra-high vacuum applications. For example, in manufacturing gaskets which deform to fill gaps.

Used as a calibration material for Differential scanning calorimetry.

It is an ingredient in the gallium-indium-tin alloy Galinstan, which is liquid at room temperature while not being toxic like mercury.

 

 

 

Pure Indium, In Metal                   Material Safety Data SheetMSDSfor Indium, In Metal

 

CAS# 7440-74-6,      Atomic Weight: , Melting Point: 156.6 oC , Boiling Point:   oC , Density: 7.31g/cm3. Evaporation Techniques  

Pure Indium, In Metal

99.99%, 99.999%

Ingot, Pellets, Granules, Shots, Rods, Disk, Plate, Sheet, Wire, Foil, Powder e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

 

Indium Alloy                  

 

 

Indium, In Alloy

In-Sb, In-Sn, In-Zn, In-Ag alloy

Chunks, Lump, Granules,,Rods, Disk, Plate, Sheet, Tube, Foil e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

 

Indium Oxide, In2O3                      Material Safety Data SheetMSDSfor Indium Oxide, In2O3

 

CAS#   ,  Atomic Weight:    , Density: 7.18g/cm3, Melting Point: 1565 oC , Boiling Point:    oC,  Evaporation TechniquesAl2O3 crucible, Tungsten boat

Indium Oxide, In2O3

 

99.99%, 99.999%

Chunks, Lump, Granules, Powder, Pieces, Rods, Disk, Plate e.t.c application in Thin Film Coating, Sputtering Targets,

M.O.Q: 50gram/1 piece

 

 

Indium Oxide doped compound

 

ZnO-In2O3, ZIO

99.99%, 90/10wt, 95/5wt e.t.c

Chunks, Lump, Granules, Pieces, Rods, Disk, Plate e.t.c application in Thin Film Coating, Sputtering Targets,

M.O.Q: 50gram/1 piece

In2O3-ZnO-Ga2O3, IZGO

99.99%, 1/1/1at, 2/2/1 at e.t.c

Chunks, Lump, Granules, Pieces, Rods, Disk, Plate e.t.c application in Thin Film Coating, Sputtering Targets,

M.O.Q: 50gram/1 piece

In2O3-SnO2, ITO

99.99%, 95/5wt, 90/10wt e.t.c

Chunks, Lump, Granules, Pieces, Rods, Disk, Plate e.t.c application in Thin Film Coating, Sputtering Targets,

M.O.Q: 50gram/1 piece

 

 

Indium Nitride, InN            Material Safety Data SheetMSDSfor Indium Nitride, InN

Applications:  

 

CAS#

Indium Nitride, InN

 

99.99%

Chunks, Pieces, Granules, Rods, Disk, Plate, Sheet, Foil, Tubes, Crucibles e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

 

Indium Sulfide, In2S3           Material Safety Data SheetMSDSfor Indium Sulfide, In2S3

Applications:  

 

CAS#

Indium Sulfide, In2S3  

 

99.99%

Powder, Sputtering targets

M.O.Q: 50gram/1 piece

 

 

 

Indium Selenide, In2Se3         Material Safety Data SheetMSDSfor Indium Selenide, In2Se3  

Applications:  

 

CAS#              Density: 5.7g/cm3, melting point: 890oC, Evaporation Techniques: 

Indium Selenide, In2Se3  

99.99%, 99.999%

Chunks, Powder, Pieces, Granules, Rods, Disk, Plate, Sheet, Foil, Tubes, Crucibles e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

 

 

Indium Telluride, In2Te3           Material Safety Data SheetMSDSfor Indium Telluride, In2Te3 

Applications:  

 

CAS#        Density: 5.8 g/cm3, melting point: 667oC, Evaporation Techniques: 

Indium Telluride, InTe 

99.99%, 99.999%

Chunks, Powder, Pieces, Granules, Rods, Disk, Plate, Sheet, Foil, Tubes, Crucibles e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

 

Indium Antimonide, InSb           Material Safety Data SheetMSDSfor Indium Antimonide, InSb      

Applications:  

 

CAS#        Density: 5.8g/cm3, melting point: 535oC, Evaporation Techniques: Tungsten boat

Indium Antimonide, InSb      

99.99%, 99.999%

Chunks, Powder, Pieces, Granules, Rods, Disk, Plate, Sheet, Foil, Tubes, Crucibles e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

 

Indium Arsenide, InAs           Material Safety Data SheetMSDSfor Indium Arsenide, InAs       

Applications:  

 

CAS#       Density: 5.7g/cm3, melting point: 943oC, Evaporation Techniques: Tungsten, Tantalum boat

Indium Arsenide, InAs         

99.99%, 99.999%

Chunks, Powder, Pieces, Granules, Rods, Disk, Plate, Sheet, Foil, Tubes, Crucibles e.t.c application in Thin Film Coating, Sputtering Targets

M.O.Q: 50gram/1 piece

 

Product classification

Huizhou Tianyi rare material Co., Ltd | 粤ICP备案10095113号 | powered by:www.300.cn