Huizhou Tianyi rare material Co., Ltd

About TYR
Product classification
  Sputtering Target
  Rare Earth Material
  Evaporation Material
  Chemical Reagent
  High Pure Metals
Product Details

Tungsten carbide (WC) sputtering targets

Purity: 99.9%


Pure WC

WC doped Co

WC doped Ni

Sputtering Targets : Diameter: 355.6mm (14") max. 

Single piece Size: Length: <254mm, Width: <127mm, Thickness: >1mm, 

if larger size than this, we can do it as Tiles joint by 45 degree or 90 degree


Tungsten cemented carbide products are widely used in cutting tools for machining, ammunition, mining, nuclear, sports, surgical instruments, jewelry and others.
Carbide ball is widely used to make the rotating ball in the tips of ballpoint pens.
Tungsten carbide block is a common material used in the manufacture of gauge blocks, used as a system for producing precision lengths in dimensional metrology.
Tungsten cemented carbide part is used as guitar slide custom-made by English famous guitarist. The hardness, weight, and density of carbide materail give it more superior sustain and volume compared to standard glass, steel, ceramic, or brass slides.
Carbide rod is usually used to make drils, end mills and other related cutting tools.
Tungsten cemented carbide has been investigated for its potential use as a catalyst and it has been found to resemble platinum in its catalysis of the production of water from hydrogen and oxygen at room temperature, the reduction of tungsten trioxide by hydrogen in the presence of water, and the isomerisation of 2, 2-dimethylpropane to 2-methylbutane. It has been proposed as a replacement for the iridium catalyst in hydrazine-powered satellite thrusters.

Tungsten carbide also called tungsten cemented carbide, cemented carbide or simply carbide.Tungsten carbide (WC) is an inorganic chemical compound containing equal parts of tungsten and carbon atoms. Tungsten cemented carbide can be pressed and formed into shapes from fine gray powder, which is considered to be its most basic form.Tungsten cemented carbide plate is approximately three times stiffer than steel, with a Young's modulus of approximately 550 GPa, and is much denser than steel or titanium. It is comparable with corundum or sapphire in hardness and can only be polished and finished with abrasives of superior hardness such as cubic boron nitride and diamond among others, in the form of powder, wheels, and compounds.

Melting point: 2785-2,870 °C,

Boiling point of 6,000 °C

Density: 15.6g/cm3


We also supply below carbide sputtering targets material:
Chromium Carbide Cr2C3, CrC
Hafnium Carbide  HfC
Niobium Carbide  NbC
Silicide Carbide  SiC
Tantalum Carbide  TaC
Titanium Carbide  TiC
Tungsten Carbide  WC
Vanadium Carbide  VC
Zirconium Carbide  ZrC
Tantalum Hafnium Carbide   Ta4HfC5

Product classification

Huizhou Tianyi rare material Co., Ltd | 粤ICP备案10095113号 | powered