Huizhou Tianyi rare material Co., Ltd

About TYR
Product classification
  Sputtering Target
  Rare Earth Material
  Evaporation Material
  Chemical Reagent
  High Pure Metals
  Compounds
Product Details

Boron carbide (B4C) sputtering targets

Purity: 99.5%

Sputtering Targets : Diameter: 355.6mm (14") max. 

Single piece Size: Length: <254mm, Width: <127mm, Thickness: >1mm, 

if larger size than this, we can do it as Tiles joint by 45 degree or 90 degree

 

Boron carbide (chemical formula approximately B4C) is an extremely hard boroncarbon ceramic, and covalent material used in tank armor, bulletproof vests, engine sabotage powders, as well as numerous industrial applications. With a Vickers Hardness of >30 GPa, it is one of the hardest known materials, behind cubic boron nitride and diamond.

Boron carbide is a semiconductor, with electronic properties dominated by hopping-type transport.The energy band gap depends on composition as well as the degree of order. The band gap is estimated at 2.09 eV, with multiple mid-bandgap states which complicate the photoluminescence spectrum. The material is typically p-type.

Application:

Padlocks
Personal and vehicle anti-ballistic armor plating.
Grit blasting nozzles.
High-pressure water jet cutter nozzles.
Scratch and wear resistant coatings.
Cutting tools and dies.
Abrasives.
Neutron absorber in nuclear reactors.
Metal matrix composites.
High energy fuel for solid fuel Ramjets Zip_fuel.
In brake linings of vehicles

Molar mass: 55.255 g/mol
Density: 2.52 g/cm3, solid.
Melting point: 2,763 °C (5,005 °F; 3,036 K)
Boiling point: 3,500 °C (6,330 °F; 3,770 K

We also supply below carbide sputtering targets material:
 
Chromium Carbide Cr2C3, CrC
 
Hafnium Carbide  HfC
 
Niobium Carbide  NbC
 
Silicide Carbide  SiC
 
Tantalum Carbide  TaC
 
Titanium Carbide  TiC
 
Tungsten Carbide  WC
 
Vanadium Carbide  VC
 
Zirconium Carbide  ZrC
 
Tantalum Hafnium Carbide   Ta4HfC5

 

Product classification

Huizhou Tianyi rare material Co., Ltd | 粤ICP备案10095113号 | powered by:www.300.cn