Country of Origin︰China
Unit Price︰US $ 200 / pc
Minimum Order︰1 pc
Lead Selenide (PbSe) granules
Purity: 99.99%, 99.999%
Tablets: 8mm dia. X 5mm L, 10mm dia. X 5mm L, 20mm dia. X 8mm L e.t.c
Pieces, Granules: 1-2.5mm, 3-6mm, 3-8mm, 1-3mm, 3-12mm e.t.c
Made sputtering targets method: hot pressing (HP), hot/cold isostatic pressing (HIP, CIP), and vacuum melting, vacuum sintering
Lead selenide (PbSe) is a semiconductor material. It forms cubic crystals of the NaCl structure; it has a direct bandgap of 0.27 eV at room temperature. (Note that incorrectly identifies PbSe and other IV–VI semiconductors as indirect gap materials.) It is a grey crystalline solid material.
It is used for manufacture of infrared detectors for thermal imaging,operating at wavelengths between 1.5–5.2 µm. It does not require cooling, but performs better at lower temperatures. The peak sensitivity depends on temperature and varies between 3.7–4.7 µm.
Single crystal nanorods and polycrystalline nanotubes of lead selenide have been synthesized via controlled organism membranes. The diameter of the nanorods were approx. 45 nm and their length was up to 1100 nm, for nanotubes the diameter was 50 nm and the length up to 2000 nm.
Lead selenide nanocrystals embedded into various materials can be used as quantum dots, for example in nanocrystal solar cells.
Lead selenide is a thermoelectric material. The material was identified as a potential high temperature thermoelectric with sodium or chlorine doping by Alekseva and co-workers at the A.F. Ioffe Institute in Russia. Subsequent theoretical work at Oak Ridge National Laboratory, USA predicted that its p-type performance could equal or exceed that of the sister compound, lead telluride.Several groups have since reported thermoelectric figures of merit exceeding unity, which is the characteristic of a high performance thermoelectric.
The mineral clausthalite is a naturally occurring lead selenide.
It may be formed by direct reaction between its constituent elements (lead and selenium).
Molar mass: 286.16 g/mol Melting point: 1,078 °C (1,972 °F; 1,351 K)
Main Applications of the PbSe Detectors:
2. Industrial process and quality control:
3. Hot spot detection
4. High speed infrared imaging:
Turbo jet combustion
Welding (laser, arc, etc.)
Spot laser characterization
5. Fire detection
6. Environmental control
Passive Infrared Cueing Systems
Active protection systems
Low cost seekers
Sensor Fuzed Weapons
We also supply below Selenide Ceramic sputtering target
Aluminum Selenide , Al2Se3 target
Antimony Selenide , Sb2Se3 target
Arsenic Selenide , As2Se3 target
Bismuth Selenide, Bi2Se3 target
Cadmium Selenide , CdSe target
Copper Selenide, CuSe, Cu2Se target
Gallium Selenide, Ga2Se3 target
Gernium Selenide, GeSe target
Indium Selenide, In2Se3 target
Lead Selenide, PbSe target
Molybdenum Selenide, MoSe2 target
Manganese Selenide, MnSe target
Niobium Selenide , NbSe2 target
Tantalum Selenide , TaSe2 target
Tungsten Selenide , WSe2 target
Zinc Selenide , ZnSe target
Label︰ Lead selenide PbSe granules