Zirconium Nitride ZrN sputtering targets use in thin film coating CAS 25658-42-8

Zirconium Nitride (ZrN) Ceramic sputtering target

Purity: 99.5%

Size: Diameter: 355.6mm (14") max.

Single piece Size: Length: <350mm, Width: <250mm, Thickness: >1mm,

if larger size than this, we can do it as Tiles joint by 45 degree or 90 degree

Shape: discs, plate, rod, tube, sheet, Delta, Rotatable and per drawing

Appearance: yellow-brown crystals
Density: 7.09 g/cm3 (24 °C)
Melting point: 2,952 °C (5,346 °F; 3,225 K)at 760 mmHg

Zirconium nitride is a hard ceramic material similar to titanium nitride and is a cement-like refractory material. Thus it is used in refractories, cermets and laboratory crucibles. When applied using the physical vapor deposition coating process it is commonly used for coating medical devices, industrial parts (notably drill bits), automotive and aerospace components and other parts subject to high wear and corrosive environments.

Also zirconium nitride was suggested as a hydrogen peroxide fuel tank liner for rockets and aircraft.

We also supply other Nitride Ceramic sputtering targets as below:

Aluminum Nitride , AlN target                       

Boron Nitride, BN target    

Hafnium Nitride, HfN target                         

Niobium Niride , NbN target       

Silicom Nitride , Si3N4 target                        

Tantalum Nitride , TaN target       

Titanium Carbon nitride , TiCN target                

 Titanium Nitride, TiN target      

Vanadium Nitride , VN target