• Aluminum (Al) metal sputtering targets CAS: 7429-90-5
  • Aluminum (Al) metal sputtering targets CAS: 7429-90-5
  • Aluminum (Al) metal sputtering targets CAS: 7429-90-5

Aluminum (Al) metal sputtering targets CAS: 7429-90-5

Model No.︰

Al

Brand Name︰

TYR

Country of Origin︰

China

Unit Price︰

US $ 100 / pc

Minimum Order︰

1 pc

Share on:

Product Description

 High pure Aluminum, Al Sputtering targets:

Purity: 99.99%, 99.999%

Diameter: 355.6mm (14")max.

Single piece Size: Length: <1500mm, Width: <250mm, Thickness: >1mm, if larger size than this, we can do it as tiles joint by 45 degree or 90 degree.

Shape: discs, plate, rod, tube, sheet, Delta, Rotatable and per drawing

Atomic Weight: 26.9815386, Melting Point: 933.437 K (660.323°C or 1220.581°F), Boiling Point: 2792 K (2519°C or 4566°F), Density: 2.70g/cm3

Applications:
Aluminum is the most widely used non-ferrous metal
Aluminum is almost always alloyed, which markedly improves its mechanical properties, especially when tempered
Aluminum is usually alloyed – it is used as pure metal only when corrosion resistance and/or workability is more important than strength or hardness. A thin layer of aluminum can be deposited onto a flat surface by physical vapor deposition or (very infrequently) chemical vapor deposition or other chemical means to form optical coatings and mirrors.
Super purity aluminum (SPA, 99.980% to 99.999% Al), used in electronics and CDs.

Aluminum is a silvery white, soft, ductile metal, Aluminum is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminum and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. The most useful compounds of aluminum, at least on a weight basis, are the oxides and sulfates.
Aluminum is a relatively soft, durable, lightweight, ductile and malleable metal with appearance ranging from silvery to dull gray, depending on the surface roughness
Corrosion resistance can be excellent due to a thin surface layer of aluminum oxide that forms when the metal is exposed to air, effectively preventing further oxidation. The strongest aluminum alloys are less corrosion resistant due to galvanic reactions with alloyed copper. This corrosion resistance is also often greatly reduced by aqueous salts, particularly in the presence of dissimilar metals.

We also supply below material:

 

Material Name

Formula Purity
Aluminum Al 99.99%, 99.999%
Antimony Sb 99.99%, 99.999%
Boron B 99.9%,99.99%, 99.999%
Barium Ba 99.3%, 99.9%, 99.95%
Bismuth Bi 99.99%, 99.999%
Graphite C 99.99%
Cobalt Co 99.9%, 99.95%, 99.99%
Chromium Cr 99.5%, 99.9%, 99.95%
Copper Cu 99.99%, 99.999%
Cadmium Cd 99.99%
Iron Fe 99.9%, 99.99%
Indium In 99.9%, 99.99%,99.999%
Lithium Li 99.5%
Molybdenum Mo 99.95%
Magnesium Mg 99.95%
Nickel Ni 99.9%, 99.98%, 99.995%, 99.999%
Niobium Nb 99.95%
Lead Pb 99.99%
Rhenium Re 99.95%, 99.99%
Silicon Si 99.999%, 99.9999%,poly or mono crystal, doped or undoped
Selenium Se 99.99%, 99.999%
Tellurium Te 99.99%,99.999%
Tantalum Ta 99.95%, 99.99%
Titanium Ti 99.7%, 99.99%, 99.995%, 99.999%
Tin Sn 99.99%, 99.999%
Tungsten W 99.95%
Vanadium V 99.9%

 



specification︰ Purity: 99.99%, 99.999%
 
Spec.:
Diameter: 355.6mm (14")max.
Single piece Size: Length: <1500mm, Width: <250mm, Thickness: >1mm, if larger size than this, we can do it as tiles joint by 45 degree or 90 degree.
 
Shape: discs, plate, rod, tube, sheet, Delta, Rotatable and per drawing
Label︰ Aluminum (Al) metal sputtering targets

Product Image

offering sputtering targets, evaporation material, rare earth metal, rare earth oxide, chemistry reagent

 

Powered by DIYTrade.com